Paint Solution

Paint adhesion is lost and the loose paint starts coming off in single to multiple coats.



Usually improper surface prep and not identifying the conditions that need pre-painting attention.
Uncontrolled moisture conditions, painting over rust, loose paint, chalking paint or dusty surfaces.



Remove all the loose paint with a wire brush.
Power washing or sand blasting is recommended for large areas.
Fill all cracks with a masonry patching compound.
Use an alkali-resistant primer.



Spot prime all bare areas for better adhesion, sheen uniformity, mildew control and durability.
Select a top quality exterior paint in the color and sheen of your choice.



Substrate: Masonry
Primer: 239 Kel-Bond II Surface Conditioner
Finish Coats: 1240 Acry-Shield Exterior Flat Finish
1245 Acry-Velvet Ext. Low Sheen Finish
1235 Seasons Ext. 100% Acrylic Flat
1236 Seasons Ext. 100% Acrylic Low Sheen

Substrate: Metal
Primer: 1725 Kel-Guard Acrylic Metal Primer
Finish Coats: 1240 Acry-Shield Exterior Flat Finish
1245 Acry-Velvet Ext. Low Sheen Finish
1250 Acry-Lustre Ext. Semi-Gloss Finish
1235 Seasons Ext. 100% Acrylic Flat
1236 Seasons Ext. 100% Acrylic Low Sheen