Paint Solution

Paint running down immediately after application leaving an uneven coating appearance.



Application technique and inadequate surface preparation.
Over thinned paint.
Applying the paint too thickly.
Spraying with the gun too close to the surface.
Painting when the temperature is too cold or the humidity too high.



Before the paint dries, immediately brush or roll out running paint evenly.
Properly prepare the surface, sand glossy areas.
Do not thin the paint.
Apply uniformly at the paint's recommended rate.
Two proper coats are better than one thick coat.



Priming is essential for better adhesion, sheen uniformity, mildew control and durability.
Select a top quality interior paint in the color and sheen of your choice.



Substrate: Various
Primer: Usually None
Finish Coats: 550 Super Latex Interior Flat Wall Paint
1610 Sat-N-Sheen Int. Low Sheen Finish
1650 Acry-Plex Interior Latex Semi-Gloss
1685 Dura-Poxy + Int./Ext. Semi-Gloss Acrylic En.
1680 Dura-Poxy + Int./Ext. Gloss Acrylic En.